Wednesday, February 13, 2008


Now you can unlock your brand new iPhone very easy. I set up an Installer script to make it even easier. In short terms, downgrade your phone to 1.1.1 and jailbreak as described below. After you have access to the phone, open Installer and goto Unlocking Tools and Install 1.1.2/1.1.3 OTB Unlocker. When it completes, you must upgrade to 1.1.2.

Bypass activation and prepare phone for software installation

1.Make sure you have a SIM-card with PIN turned off, and power on your phone (the supplied AT&T card works fine).

2.On the activation screen, slide for emergency and dial: *#301# to make the phone call itself. (If the incoming call dialog quickly disappears but it keeps ringing, just dial 0 (remove *#301# first), and it will call itself)

3.Answer the call, and tap on Hold

4.Phone will call it self again, tap Decline. You will now be returned to the normal dialer.

5.Tap on contacts, and tap the + icon to add a new. The only info you are going to add to this contact are two URL's. To add a URL, tap Add new URL. The first URL is prefs followed by a colon: prefs: and the second is Tap Save.

6.Your contact now has two "web pages" - tap on the first one (prefs:). This will take you to the settings dialog. The reason you want this, is because you need to connect to a Wi-Fi network, so tap on Wi-Fi, and get connected to a network, and make sure the icon on top of the screen is indicating that you are connected. While you are in the settings dialog, you should also set: General → Auto-Lock → Never.

Now, press the home button, and again, slide for emergency dial 0, Answer the call, Hold and Decline the new call so that you get to the contacts. Tap on your contact (No Name), and this time tap on the other home page,

8.Safari will launch and show you a webpage. Tap on Tap here to jailbreak your iPhone
Phone will return to activation screen and after a few seconds the phone should restart.

If the phone does not restart after waiting a full minute, please make sure that you have your phone connected to the computer and try again.

11.When the phone starts again, it should no longer say slide for emergency, but rather Slide to unlock It means it was successfull! Activation is now bypassed, and phone prepared for software installation! (If you are going to use an AT&T SIM, you won't need to do the next step.)

Unlock the SIM-lock on jailbroken 1.1.1

1.Open installer, and install the update if prompted.
2.Go to sources and tap Edit and Add
3.Add this URL:
4.Tap Done and then Refresh
5.Go to Install (at bottom) and scroll down to the Unlocking Tools category and install AnySIM
6.When installed you can press the home button, and you will find a new AnySIM icon on your home screen. Launch it and follow the instructions.
7.The unlocking process will take about 5-10 minutes, in the end it should say it was successful!
8.To clean up your phone, launch Installer and uninstall AnySIM. Then go to Settings → General → Auto-Lock and set it to a prefered value.

Congratulations, you are done!